C.A.PICARD International

Lamination Plates

C.A.PICARD multilayer lamination plates are manufactured to the highest of standards and quality materials available.
Lamination tooling plates are available in standard 4 slot one offset pattern, round holes, or specified hole patterns.
All lamination plates are tooled to your specifications with hardened steel bushings.

All bushings are precision fit and ground flush to plate. All plates have an orientation chamfer, are treated with rust preventative, identified with serial number, date of manufacture, wrapped with protective coverings and packaged in wood crates.

Note: Optional materials available upon request.

Lamination Plates
Steel Quality:
AISI 4140 H

Hardness:
38 - 40 HRC

Thermal Expansion Coefficient:
10^-6 / °C
20-100 °C = 11.1
20-200 °C = 12.1
20-300 °C = 12.9

Heat Conductivity:
42 W/mK

Analysis:
C = 0.42
Cr = 1.05
Mn = 0.65
Mo = 0.20

Dimensions and Tolerances

Length / Width:
± 0,030"

Thickness:
± 0,002"

Flatness:
0,002" TIR/FT

Parallelism:
- up to 14":
- over 14":

0,010"
0,015"

Surface finish:
Grit 80
Ra~1.2µm
Rz~8.0µm
Rmax~10.0µm

Available thickness:
.250", .275", .375"

Separator Plates

C.A.PICARD multilayer separator plates are available in standard 4 slot one offset pattern, or per your specified requirements. Plates can be supplied with slots, holes, or combination of both.

	Lamination Plates
Steel Quality:	420 SS
Hardness:	45 - 50 HRC
Thermal Expansion Coefficient:	10^-6 / °C
Heat Conductivity:	30 W/mK
Analysis:	C = 0.20 Cr = 13.0
Dimensions and Tolerances
Length / Width:	± 0,030"
Thickness:	± 0,003"
Flatness:	depending on size
Parallelism: - up to 14": - over 14":	0,010" 0,015"
Surface finish:	#4 Ra~0.25µm Rz~2.4µm Rmax~3.5µm
Available thickness:	.40", .052", .062"

All plates have an orientation chamfer, wrapped with protective coverings and packaged in wood crates.
Note: Optional materials available upon request.

Carrier Plates
For Auto Load & Unload Press System

C.A.PICARD multilayer carrier plates are manufactured to the highest standards and quality materials available. Lamination carrier plates are equipped with locators for ease of assembly, transportation and disassembly of your lamination books. Hole patterns and configurations per customer specified requirements or we can make recommendations to best fit your specific needs.

Lamination Plates
Steel Quality:
6150

Hardness:
48 - 50 HRC

Thermal Expansion Coefficient:
10^-6 / °C
20-100°C = 11.1
20-200°C = 12.1
20-300°C = 12.9

Heat Conductivity:
42 W/mK

Analysis:
C = 0.53
Cr = 1.02
Mn = 0.85